| Application: | Harvester |
|---|---|
| Power Source: | Tractor |
| Harvest method: | Cutting |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ANON tractor mounted maize corn straw forage silage harvester for farm
Silage Harvester is mainly used for harvesting maize, sorghum and grass etc. Multi-functions can be achieved at one time, like harvesting, chopping, kneading and blowing silage to trailer etc. It can work independently , or work as a header by being mounted on tractor.
All stalks and leaves are finely chopped and grains pulverized for effective rumination, Silage Harvesters-acknowledged the world over as the benchmark for best chopping quality. The cost-effectiveness of these machines is clear: make more use of your existing tractors, optimize coordination of harvesting operations with transport logistics, just-in-time harvesting to meet your schedule, obtain best silage quality at the lowest cost, plus straightforward servicing
ANON tractor mounted maize corn straw forage silage harvester for farm
Main advantage
1. crushing: a roller-type grain breaker using high technology.
1) Grain breakage rate is over 95%
2) Working principle of roller crusher
The double roller is flexible and can be discharged smoothly when entering foreign matter, thereby reducing the failure rate.
2. Super horsepower
Weichan brand super-horsepower 310hp engine,high powerful, fuel-efficient and easy to maintain.
3. Automatic sharpening
With automatic grinding, the quality of the cutting can be continuously guaranteed.
4. Automatic oiling
The Germany technical automatic oil filling system is installed to ensure the bearing life and improve the stability of the machine.
5. Install double hydrostatic drive
The walking system and the feeding system are all equipped with imported double hydrostatic drive, which is flexible and greatly reduces the failure rate.
6. Hob type cutting
The design of the knife roll adopts Deere design, the blade is arranged in 4 rows of herringbone, the length of the cutting is 9-22mm, the two steps are infinitely adjustable, and the feed length is accurate and perfect.
7. Fast efficiency
The feeding inlet width is up to 750mm and the harvesting width is 3000mm, which ensures large material throughput, ensures effective flattening of materials, and forms a stable material flow during operation.
8. Good stability:
The imported Trelleborg 500 meridian vacuum wide tires reduce the compaction of the working ground and ensure that the ditch is not pressed.
9: High configuration
Ultra-high configuration for easier operation and more comfortable summer work
ANON tractor mounted maize corn straw forage silage harvester for farm
|
Model |
4QZ-14A |
|||
|
Overall dimensions (L*W*H)mm |
6560*3100*3450MM |
|||
|
Working width (mm) |
2900 |
|||
|
Working efficiency (ha./hour) |
0.66-1 ha./hour |
|||
|
Cutting stubble height (cm) |
≤15 |
|||
|
Cutting length of stems (mm) |
9-22MM can be adjusted |
|||
|
Feeding capacity |
14kg/s |
|||
|
Whole weight (kg) |
8800kg |
|||
|
Minimum passing radius (turning left) |
7500mm |
|||
|
Minimum passing radius (turning right) |
7500mm |
|||
|
Guide wheel |
1580mm |
|||
|
drive wheel |
2250mm |
|||
| driving tire | 15-24 [Φ1330×410 mm] | |||
| Air pressure | 0.18~0.2 MPa | |||
| Guided tire | 10-15 [Φ750×254 mm] | |||
| Air pressure | 0.18~0.2 MPa | |||
| Wheelbase | 2300mm | |||
| Minimum ground clearance | 2400mm | |||
| Driving cab type | common type | |||
| Minimum cutting height | ≤150 mm | |||
| Header lifting range | 120-830 mm | |||
| Straw shredding mechanism Type | drum type | |||
| Rotor diameter | 630mm | |||
| Spindle speed | 1200 r/min | |||
| Throwing height | 5350 mm | |||
| Throw distance | ≥8 m | |||
| Throwing cylinder rotation angle | 270 | |||
| walking speed | 0-20km / hour infinitely variable speed | |||
|
Number of rake blades |
48 |
|||
Detail Photos
){kind=link}